產品介紹

                       

 

● 油壓轉角下壓缸主要使用在空間狹小，且無任何輔助壓板下，能夠輕易的夾持及放鬆工作。

● 本油壓轉角下壓缸為下拉式油壓缸，並有五種規格及兩種可360°任意安裝之壓板供選擇。

注意事項：

● 在使用油壓轉角下壓缸時，若需要增長壓板之長度時，請勿大於原長之1.5倍。

● 建議使用油壓轉角下壓缸時，請加裝流量控制閥，避免因速度過快而損壞缸體及內部零件。

● These swing clamps are used when it is required to keep the fixture workpiece area free of straps and clamping components for unrestricted workpiece loading and unloading.

● This hydraulic clamping element is a pull type cylinder, There are five standard sizes, and for each size two versions of standard clamping arms, mounting of these clamping arms at any angle within 360° .

Note：

● Please don't exceed 1.5 times of th original length, if it is necessary to increase the length of the clamping arm.

● Suggested to install a flow control valve protect cylinder barrel and internal components against fretting wear.